Technical characteristics
• three-phase power supply voltage 400Vac ±10% 50/60Hz;
• high performance ZVT Switching technology;
• efficiency ≈ 95%;
• form factor at maximum power ≈ 92%;
• current control accuracy ±1A;
• voltage control precision ±0.1V;
• charging process managed by microprocessor;
• graphic display to keep all parameters under control charging at the same time;
• charging current easily settable on the display;
• charging cycles for battery types: free lead,gel, agm, fast opportunity, CAN-BUS communication,desulfation;
• possibility to easily set on the display: the time post-charging, final charging voltage, type of starting (automatic or manual);
• simultaneous display with the current display, voltage, Ah and loaded time;
• storage and display of the last 1000 cycles load;
• charge equalization programmable in duration and period (also weekly);
• buffer rate;
• programmable delayed start;
• desulfation cycle;
• CAN-BUS communication;
• Wi-Fi communication for exporting stored cycles;
• Wi-Fi communication for firmware updating;
• cable compensation to eliminate voltage drops;
• automatic or manual start;
• double thermal protection;
• protected against battery polarity inversion;
• 12 hour battery overload protection;
• thermostated forced ventilation;
• interruption of charging with battery disconnected;
• complies with European CE regulations;
• dimensions: 550x350x115 mm;
• weight: 14 kg including cables.
Optionals
• air blowing pump (see DIGITAL ACCESSORIES);
• water top-up pump (see DIGITAL ACCESSORIES);
• wall fixing bracket (see DIGITAL ACCESSORIES);
• trolley for placing the battery charger (see DIGITAL ACCESSORIES);